- ZX UHA Product OverviewZX UHA (UMTS Home Access) Solution is focusing on the way to provide the service similar to UMA and any other WLAN system and avoid the unsecured factors like unlicensed carrier frequency band.
ZX UHA solution includes ZX HNodeB, ZX DNC, HCS server, OMC and SGW.
ZX HNodeB is an indoor wireless gateway, which is based on the UMTS FDD technology. It adopts the standard air interface, Uu interface, which is defined in 3GPP specifications. It can adapt to general 3G terminals. ZX HNodeB provides the IP based standard Iub interface to access the mobile networks.
ZX DNC (Domestic Node Concentrator) acts as the role of RNC. It consists of not only the functionalities of RNC that is defined in 3GPP specification, but also some special control functionalities and IPSec security gateway function. Some of these control functionalities are user access control, HNodeB access control, HNodeB position management, network parameter transferring, and etc.
SGW (Security Gateway) is the gateway to protect the network and message security. It is compliant to the IKEv2 and IPSec protocol.
HCS (HNodeB Configuration Server) is the data center for the system. It includes the data for the HNodeB and the data for the subscribers.
OMC (Operation and Maintain Center) provide the tool for managing and monitoring all the units.
- ZXR10 5900 L3 Gigabit Intelligent Routing SwitchZXR10 5900 series L3 Gigabit Intelligent Ethernet Switch uses high-speed ASIC forwarding chips to perform L2-L7 wire-speed packet forwarding. It provides complete support for complete family of Ethernet protocols, efficient QOS priority mechanisms and flexible management mechanisms. It supports complete L3 routing protocols. Providing high-density GE ports, ZXR10 5900 provides the required access and aggregation features of GE interface for IP MAN or campus networks. Therefore, it is an ideal product for the construction of the core of campus networks and the aggregation layer of IP MAN.
ZXR10 5928-FI provides 20 x optical GE interfaces, 4 x optical/electrical adaptive interfaces and 4 x expansion slots.
- ZTE C220+9806HZXA10 C220 and FSAP 9806H are next generation solutions offered by ZTE to operators willing to increase the performance of their broadband Access networks by offering higher bandwidth to their customers. By providing GPON and VDSL2 technology platforms, ZTE offers the appropriate solution for FTTx deployments, in which the ZXA10 C220 acts as the OLT located in the central office and the FSAP 9806H acts as the ONU located in the curb or in the building.
ZXA10 C220 is a GPON platform based on ATM, Ethernet and TDM protocols, offering 2 asymmetrical speeds (theoretical 2,5 Gbps downstream and 1.5 Gbps upstream) over 60 kms for up to 64 users; it offers high density with up to 7 680 users per rack and a high switching capacity with up to 64 Gbps thus allowing additional CAPEX savings with increased density.
The FSAP 9806H is a next generation IP DSLAM that has been designed to offer a high density with up to 64 VDSL2 ports or 96 ADSL2 ports per chassis and powerful multicast IPTV features with up to 256 Multicast groups. Delivering powerful QoS together with high reliability and security, it offers additional OPEX savings thanks to its mini-size and high density level making its installation easier and faster.
Both ZXA10 C220 and FSAP 9806H are based on Unified network management system (NetNumen) and Unified software platform design (ZXROS) and have a low power consumption thus offering additional OPEX savings to operators.
Leveraging leverage ZTE's unmatched R&D efforts which started back in 1995 in access networks leading to ZTE's leadership with over 25 million access network users worldwide, ZXA10 C220 and FSAP 9806H products answer to operators requirements, whether incumbents, alternative or new entrants like municipalities or power utilities, willing to preserve their investment, optimize CAPEX and OPEX expenditures while maximizing their revenues with new services.